<?php
/* -*- tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
# ***** BEGIN LICENSE BLOCK *****
# This file is part of InDefero, an open source project management application.
# Copyright (C) 2008 Céondo Ltd and contributors.
#
# InDefero is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# InDefero is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
#
# ***** END LICENSE BLOCK ***** */

$cfg = array();

#
# You must set them to false once everything is running ok.
#
$cfg['debug'] = true;
# It will help you catch errors at beginning when configuring your
# SCM backend. It must be turned off in production.
$cfg['debug_scm'] = false;

#
# Note: By default, InDefero will not manage the repositories for
# you, you can enable the repositories management with the
# built-in plugins. The documentation of the plugins is available
# in the `doc/` folder.
#

# If you have a single git repository, just put the full path to it
# without trailing slash. The path is the path to the git database,
# so you need to include the /.git folder.
# For example: '/path/to/my/project/.git'
#
# If you have multiple repositories, you need to put %s where you
# want the shortname of the project to be replaced.
# For example:
# - You have many projects on your local computer and want to use
#   InDefero to see them. Put: '/home/yourlogin/Projects/%s/.git'
# - You have many projects on a remote server with only "bare" git
#   repositories. Put: '/home/git/repositories/%s.git'
#
# ** Do not forget to give read access to these folders to your www
# ** user. For example, adding www to the git group.
$cfg['git_repositories'] = '/home/git/repositories/%s.git';
#
# Like for the git_repositories definition, the path can contains %s
# and it will be automatically replaced. You can ignore this
# configuration variable as it is only for information use in the
# tree view.
#
$cfg['git_remote_url'] = 'git://localhost/%s.git';
$cfg['git_write_remote_url'] = 'git@localhost:%s.git';

# Same as for git, you can have multiple repositories, one for each
# project or a single one for all the projects.
#
# In the case of subversion, the admin of a project can also select a
# remote repository from the web interface. From the web interface
# you can define a local repository, local repositories are defined
# here. This if for security reasons.
$cfg['svn_repositories'] = 'file:///home/svn/repositories/%s';
$cfg['svn_remote_url'] = 'http://localhost/svn/%s';

# Path to the monotone binary
$cfg['mtn_path'] = 'mtn';
# Additional options for the started monotone process
$cfg['mtn_opts'] = array('--no-workspace', '--norc');
#
# You can setup monotone for use with indefero in several ways. The
# two most-used should be:
#
# 1) One database for everything:
#
#    Set 'mtn_repositories' below to a fixed database path, such as
#    '/home/mtn/repositories/all_projects.mtn'
#
#    Pro: - easy to setup and to manage
#    Con: - while read access can be configured per-branch,
#           granting write access rights to a user means that
#           he can write anything in the global database
#         - database lock problem: the database from which
#           indefero reads its data cannot be used to serve the
#           contents to the users, as the serve process locks
#           the database
#
# 2) One database for every project with 'usher':
#
#    Download and configure 'usher'
#    (mtn clone mtn://monotone.ca?net.venge.monotone.contrib.usher)
#    which acts as proxy in front of all single project databases.
#    Create a basic configuration file for it and add a secret admin
#    username and password. Finally, point the below variable
#    'mtn_usher_conf' to this configuration file.
#
#    Then set 'mtn_remote_url' below to a string which matches your setup.
#    Again, the '%s' placeholder will be expanded to the project's
#    short name. Note that 'mtn_remote_url' is used as internal
#    URI (to access the data for indefero) as well as external URI
#    (for end users) at the same time. 'mtn_repositories' should then
#    point to a directory where all project-related files (databases,
#    keys, configurations) are kept, as these are automatically created
#    on project creation by IDF.
#
#    Example: 'mtn_repositories' is configured to be '/var/monotone/%s'
#
#      - IDF tries to create /var/monotone/<projectname> as root directory
#      - The database is placed in as /var/monotone/<projectname>/database.mtn
#      - The server key is put into /var/monotone/<projectname>/keys and
#        is named "<projectname>-server@<host>", where host is the host part
#        of 'mtn_remote_url'
#
#    therefor /var/monotone MUST be read/writable for the www user and all
#    files which are created underknees MUST be read/writable by the user
#    who is executing the usher instance! The best way to achieve this is with
#    default (POSIX) ACLs on /var/monotone.
#
#
#    You could also choose to setup usher by hand, i.e. with individual
#    databases, in this case leave 'mtn_usher_conf' below commented out.
#
#    Pro: - read and write access can be granted per project
#         - no database locking issues
#         - one public server running on the one well-known port
#    Con: - harder to setup
#
# Usher can also be used to forward sync requests to remote servers,
# please consult its README file for more information.
#
# monotone also allows to use SSH as transport protocol, so if you do not plan
# to setup a netsync server as described above, then just enter a URI like
# 'ssh://my-host.biz/home/mtn/repositories/%s.mtn' in 'mtn_remote_url'.
#
$cfg['mtn_repositories'] = '/home/mtn/repositories/%s.mtn';
$cfg['mtn_remote_url'] = 'mtn://my-host.biz/%s';
#
# Whether the particular database(s) are accessed locally (via automate stdio)
# or remotely (via automate remote_stdio). 'remote' is the default for
# netsync setups, while 'local' access should be choosed for ssh access.
#
# Note that you need to setup the hook 'get_remote_automate_permitted' for
# each remotely accessible database. A full HOWTO set this up is beyond this
# scope, please refer to the documentation of monotone and / or ask on the
# mailing list (monotone-users@nongnu.org) or IRC channel
# (irc.oftc.net/#monotone)
#
$cfg['mtn_db_access'] = 'remote';
#
# If configured, this allows basic control of a running usher process
# via the forge administration. The variable must point to the full (writable)
# path of the usher configuration file which gets updated when new projects
# are added
#
#$cfg['mtn_usher_conf'] = '/path/to/usher.conf';

# Mercurial repositories path
#$cfg['mercurial_repositories'] = '/home/mercurial/repositories/%s';
#$cfg['mercurial_remote_url'] = 'http://projects.ceondo.com/hg/%s';

# admins will get an email in case of errors in the system in non
# debug mode.
$cfg['admins'] = array(
                       array('Admin', 'you@example.com'),
                       );

# Email configuration
$cfg['send_emails'] = true;
$cfg['mail_backend'] = 'smtp';
$cfg['mail_host'] = 'localhost';
$cfg['mail_port'] = 25;

# Paths/Url configuration.
#
# Examples:
# You have:
#   http://www.mydomain.com/myfolder/index.php
# Put:
#   $cfg['idf_base'] = '/myfolder/index.php';
#   $cfg['url_base'] = 'http://www.mydomain.com';
#
# You have mod_rewrite:
#   http://www.mydomain.com/
# Put:
#   $cfg['idf_base'] = '';
#   $cfg['url_base'] = 'http://www.mydomain.com';
#
#
#
$cfg['idf_base'] = '/index.php';
$cfg['url_base'] = 'http://localhost';

# Url to access the media folder which is in the www folder
# of the archive
$cfg['url_media'] = 'http://localhost/media';

# Url to access a folder in which the files you upload through
# the downloads tab will be stored.
$cfg['url_upload'] = 'http://localhost/media/upload';
# Path to the upload folder
$cfg['upload_path'] = '/home/www/indefero/www/media/upload';

#
# The following path *MUST NOT* be accessible through a web browser
# as user will be able to upload .html, .php files and this can
# create *TERRIBLE* security issues. In this folder, the attachments
# to the issues will be uploaded and we do not restrict the content type.
#
$cfg['upload_issue_path'] = '/home/www/indefero/attachments';

#
# write here a long random string unique for this installation. This
# is critical to put a long string, with at least 40 characters.
$cfg['secret_key'] = '';

# the sender of all the emails.
$cfg['from_email'] = 'sender@example.com';

# Email address for the bounced messages.
$cfg['bounce_email'] = 'no-reply@example.com';

# Temporary folder where the script is writing the compiled templates,
# cached data and other temporary resources.
# It must be writeable by your webserver instance.
# It is mandatory if you are using the template system.
$cfg['tmp_folder'] = '/tmp';

# Database configuration
$cfg['db_login'] = 'www';
$cfg['db_password'] = '';
$cfg['db_server'] = '';
$cfg['db_version'] = '5.1'; # Only needed for MySQL
# If you want to have different installations with the same DB
$cfg['db_table_prefix'] = 'indefero_';
# ** DO NOT USE SQLITE IN PRODUCTION **
# This is not because of problems with the quality of the SQLite
# driver or with SQLite itself, this is due to the lack of migration
# support in Pluf for SQLite, this means we cannot modify the DB
# easily once it is loaded with data.
$cfg['db_engine'] = 'PostgreSQL'; # SQLite is also well tested or MySQL
$cfg['db_database'] = 'website'; # put absolute path to the db if you
                                 # are using SQLite.
#
# The extension of the downloads are limited. You can add extra
# extensions here. The list must start with a space.
# $cfg['idf_extra_upload_ext'] = ' ext1 ext2';
#
# By default, the size of the downloads is limited to 2MB.
# The php.ini upload_max_filesize configuration setting will
# always have precedence.
# $cfg['max_upload_size'] = 2097152; // Size in bytes

#
# Time zone
# http://www.php.net/manual/en/timezones.php
#
# $cfg['time_zone'] = 'Europe/Berlin';


$cfg['pear_path'] = '/usr/share/php';

$cfg['login_success_url'] = $cfg['url_base'].$cfg['idf_base'];
$cfg['after_logout_page'] = $cfg['url_base'].$cfg['idf_base'];

# Caching of the scm commands.
$cfg['cache_engine'] = 'Pluf_Cache_File';
$cfg['cache_timeout'] = 300;
$cfg['cache_file_folder'] = $cfg['tmp_folder'].'/cache';

# The folder in which the templates of the application are located.
$cfg['template_folders'] = array(
                                 dirname(__FILE__).'/../templates',
                                 );

$cfg['installed_apps'] = array('Pluf', 'IDF');
$cfg['pluf_use_rowpermission'] = true;
$cfg['middleware_classes'] = array(
         'Pluf_Middleware_Csrf',
         'Pluf_Middleware_Session',
         'IDF_Middleware',
         'Pluf_Middleware_Translation',
         );
$cfg['template_context_processors'] = array('IDF_Middleware_ContextPreProcessor');
$cfg['idf_views'] = dirname(__FILE__).'/urls.php';

# available languages
$cfg['languages'] = array('en', 'fr');

# SCM base configuration
$cfg['allowed_scm'] = array('git' => 'IDF_Scm_Git',
                            'svn' => 'IDF_Scm_Svn',
                            'mercurial' => 'IDF_Scm_Mercurial',
                            'mtn' => 'IDF_Scm_Monotone',
                            );

# If you want to use another memtypes database
# $cfg['idf_mimetypes_db'] = '/etc/mime.types';

# Extra text files when displaying source
# $cfg['idf_extra_text_ext'] = 'ext1 ext2 ext3';

# If you can execute the shell commands executed to get info
# from the scm  with the user of your PHP process but it is
# not working from within PHP, this can be due to the environment
# variables not being set correctly. Note the trailing space.
# $cfg['idf_exec_cmd_prefix'] = '/usr/bin/env -i ';

# Path to the SCM binaries. These binaries are not necessarily in
# the path of your webserver or fastcgi process. In that case you
# may need to set the path manually here. This is the case with OSX.
# To know which path you need to provide, just run:
# $ which git
# from the command line. This will give you the path to git.
# $cfg['svn_path'] = 'svn';
# $cfg['svnlook_path'] = 'svnlook';
# $cfg['svnadmin_path'] = 'svnadmin';
# $cfg['hg_path'] = 'hg';
# $cfg['git_path'] = 'git';

# If you do not want to have calculations of the repositories, attachments
# and downloads size, set it to true. You can set to false some
# times to times to check the size.
# $cfg['idf_no_size_check'] = false;

return $cfg;