diff --git a/src/IDF/conf/idf.php-dist b/src/IDF/conf/idf.php-dist index 118a387..6660d1b 100644 --- a/src/IDF/conf/idf.php-dist +++ b/src/IDF/conf/idf.php-dist @@ -3,7 +3,7 @@ /* # ***** BEGIN LICENSE BLOCK ***** # This file is part of InDefero, an open source project management application. -# Copyright (C) 2008 Céondo Ltd and contributors. +# Copyright (C) 2008 - 2011 Céondo Ltd and contributors. # # InDefero is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -24,34 +24,30 @@ $cfg = array(); $cfg['allowed_scm'] = array(); -# Write here a long random string unique for this installation. This -# is critical to put a long string, with at least 40 characters. -# You can use the output of -# dd if=/dev/urandom bs=1 count=64 2>/dev/null | base64 -w 0 +# Enter a long random string here that is unique for this installation. +# It is critical to put in a long string with at least 40 characters. +# You can use dd like this to gain some randomness: +# $ dd if=/dev/urandom bs=1 count=64 2>/dev/null | base64 -w 0 $cfg['secret_key'] = ''; -# -# Debug section -# +# ---------------------------------------------------------------------------- # +# Debug section # +# ---------------------------------------------------------------------------- # -# You must set them to false once everything is running ok. -# It will help you catch errors at beginning when configuring your -# forge and SCM backend. -# -# It must be turned off in production. +# In debug mode Indefero renders stack traces in case of an error that include +# more information about a specific problem. Since these stack traces often +# contain sensible data, this option MUST BE DEACTIVATED in production mode. +# (see $cfg['admins'] below to learn how you can still be notified about +# problems without 'debug' being enabled). $cfg['debug'] = true; -$cfg['debug_scm'] = false; +# ---------------------------------------------------------------------------- # +# Path section # +# ---------------------------------------------------------------------------- # - - -# -# Path section -# - -# Temporary folder where the script is writing the compiled templates, -# cached data and other temporary resources. +# Temporary folder where the application is writing compiled templates, +# cached data and other temporary resources to. # It must be writeable by your webserver instance. $cfg['tmp_folder'] = '/tmp'; @@ -61,19 +57,30 @@ $cfg['pear_path'] = '/usr/share/php'; # Path to the upload folder $cfg['upload_path'] = '/home/www/indefero/www/media/upload'; -# The following path *MUST NOT* be accessible through a web browser -# as user will be able to upload .html, .php files and this can -# create *TERRIBLE* security issues. In this folder, the attachments +# The following path MUST NOT be accessible through a web browser, +# as user will otherwise be able to upload executable files (*.php) and +# this can create TERRIBLE security issues. In this folder, the attachments # to the issues will be uploaded and we do not restrict the content type. $cfg['upload_issue_path'] = '/home/www/indefero/attachments'; +# If your SCM binary is not accessible for the web user (for example, because +# it is not in the system PATH), you can enter the full path to it here. +$cfg['svn_path'] = 'svn'; +$cfg['svnlook_path'] = 'svnlook'; +$cfg['svnadmin_path'] = 'svnadmin'; +$cfg['hg_path'] = 'hg'; +$cfg['git_path'] = 'git'; +$cfg['mtn_path'] = 'mtn'; + +# The monotone backend allow you to add extra options for the started monotone +# process; please keep the default if unsure. +$cfg['mtn_opts'] = array('--no-workspace', '--no-standard-rcfiles'); +# ---------------------------------------------------------------------------- # +# URL section # +# ---------------------------------------------------------------------------- # - -# -# URL section -# # Examples: # You have: # http://www.mydomain.com/myfolder/index.php @@ -87,110 +94,110 @@ $cfg['upload_issue_path'] = '/home/www/indefero/attachments'; # $cfg['idf_base'] = ''; # $cfg['url_base'] = 'http://www.mydomain.com'; # -# -# $cfg['idf_base'] = '/index.php'; $cfg['url_base'] = 'http://localhost'; -# Url to access the media folder which is in the www folder -# of the archive +# URL to access the media folder which is in the www folder +# of the distribution archive $cfg['url_media'] = 'http://localhost/media'; -# Url to access a folder in which the files you upload through +# URL to access a folder in which the files you upload through # the downloads tab will be stored. $cfg['url_upload'] = 'http://localhost/media/upload'; +# ---------------------------------------------------------------------------- # +# Internationalization section # +# ---------------------------------------------------------------------------- # - - -# -# Internationalization section -# - -# 'time_zone' must be a valid timezone, you can find a list of them at the url: -# http://www.php.net/manual/en/timezones.php +# Enter a valid time zone here to ensure that external timestamps, coming from +# the SCM for example, are translated into this time zone. +# A list of available time zones can be found at +# $cfg['time_zone'] = 'Europe/Berlin'; -# 'languages' is an array of available languages in your forge -# If you want to enable extra language, -# add your language files in 'src/IDF/locale' before +# Configure which languages should be available in your forge. +# If you want to enable an additional language, ensure that the +# language file in question resides in 'src/IDF/locale'. $cfg['languages'] = array('en', 'fr', 'de', 'es_ES'); - - - +# ---------------------------------------------------------------------------- # +# Email section # +# ---------------------------------------------------------------------------- # +# +# Indefero uses the PEAR Mail class to send mails. Available mail backend are: # -# Email section -# Indefero use the PEAR Mail class to send mails. Available mail backend are: # - The PHP Mail built-in function (mail) # - Sendmail (sendmail) # - Simple Mail Transfer Protocol (smtp) # -# Sendmail and SMTP need extra configuration, see example below +# Sendmail and SMTP need extra configuration, see the examples below. # -# 'send_emails' is a general lock to enable/disable, the mail sending process -# - true : Enable mail to be send -# - flase : Disable it +# This is a general lock to enable or disable the mail sending process. +# True enables mail sending, false disables it. $cfg['send_emails'] = false; -# The baackend to use: mail, sendmail, smtp +# The mail backend to use: mail, sendmail, or smtp $cfg['mail_backend'] = 'mail'; -# Mails send by indefero will have thoses headers: +# Mails sent by indefero will have thoses headers: $cfg['from_email'] = 'sender@example.com'; $cfg['bounce_email'] = 'no-reply@example.com'; -# 'admins' will get an email in case of errors -# when the system is in non debug mode. -$cfg['admins'] = array(array('You', 'you@example.com'), - array('Bob', 'bob@example.com'), - ); - -## Example of SMTP configuration +# The following persons will get an email in case of errors, i.e. when the +# system is in not in debug mode (see $cfg['debug'] above). +$cfg['admins'] = array( + array('You', 'you@example.com'), + array('Bob', 'bob@example.com'), +); + +## +## Example SMTP configuration +## ## The server to connect. Default is localhost #$cfg['mail_host'] = 'localhost'; -## The port to connect. Default is 25 +## The port to connect. Default is 25 #$cfg['mail_port'] = 25; -## The username to use for SMTP authentication. +## The username to use for SMTP authentication. #$cfg['mail_username'] = ''; -## The password to use for SMTP authentication. +## The password to use for SMTP authentication. #$cfg['mail_password'] = ''; -## The value to give when sending EHLO or HELO. Default is localhost +## The value to give when sending EHLO or HELO. Default is localhost #$cfg['mail_localhost'] = 'localhost'; ## The SMTP connection timeout. Default is NULL (no timeout) #$cfg['mail_timeout'] = NULL; ## Whether to use VERP or not. Default is FALSE #$cfg['mail_verp'] = FALSE; -## Example of sendmail configuration +## +## Example sendmail configuration +## ## The location of the sendmail program on the filesystem. ## Default is /usr/bin/sendmail -#$cfg['mail_sendmail_path'] = '/usr/bin/sendmail'; +#$cfg['mail_sendmail_path'] = '/usr/bin/sendmail'; ## Additional parameters to pass to the sendmail. Default is -i -#$cfg['sendmail_args'] = '-i'; - - - +#$cfg['sendmail_args'] = '-i'; +# ---------------------------------------------------------------------------- # +# Database section # +# ---------------------------------------------------------------------------- # # -# Database section +# WARNING: DO NOT USE SQLITE IN PRODUCTION # -# ** DO NOT USE SQLITE IN PRODUCTION ** # This is not because of problems with the quality of the SQLite -# driver or with SQLite itself, this is due to the lack of migration -# support in Pluf for SQLite, this means we cannot modify the DB +# driver or with SQLite itself, but due to the lack of migration +# support in Pluf for SQLite. This means we cannot modify the DB # easily once it is loaded with data. # -# 'db_engine' must be one of available database engine: SQLite, MySQL, PostgreSQL +# Enter one of the supported database engines: SQLite, MySQL, or PostgreSQL $cfg['db_engine'] = 'PostgreSQL'; -# 'db_database' is the database name for MySQL and PostgreSQL, -# and the absolute path to the db if you are using SQLite. +# The database name for MySQL and PostgreSQL, and the absolute path +# to the database file if you are using SQLite. $cfg['db_database'] = 'website'; # The database server to connect. @@ -203,27 +210,30 @@ $cfg['db_password'] = 'bar'; # The version of your database server, only needed for MySQL # $cfg['db_version'] = '5.1'; -# A prefix for your table name -# It's can be useful if you run multiple installation in the same database +# A prefix for your table name; this can be useful if you plan to run +# multiple indefero installations on the same database instance. $cfg['db_table_prefix'] = 'indefero_'; +# ---------------------------------------------------------------------------- # +# Cache section # +# ---------------------------------------------------------------------------- # - - +# The cache is used to speed up the operations of most of the SCM commands. # -# Cache section -# The cache is use to speed up operation on most of scm commands. +# Indefero supports three methods to handle the cache, and you need to +# configure it with one of them: # -# Indefero support 3 methods to handle the cache, and you need to one of them: # - Files (Pluf_Cache_File) # - Alternative PHP Cache (Pluf_Cache_Apc) # - Memcached (Pluf_Cache_Memcached) # -# APC and Memcached need extra installation to run, -# so It's easier to use Files in a first time. -# @see http://www.php.net/manual/en/book.apc.php -# @see http://www.php.net/manual/en/book.memcached.php +# Both, APC and Memcached, need additional extensions to be compiled into +# your PHP installation, so the easiest is to use the file-based cache +# for an initial setup. +# +# For more information on APC, see . +# Memcached is documented at . # $cfg['cache_engine'] = 'Pluf_Cache_File'; $cfg['cache_timeout'] = 300; @@ -242,136 +252,114 @@ $cfg['cache_file_folder'] = $cfg['tmp_folder'].'/cache'; #$cfg['cache_memcached_compress'] = MEMCACHE_COMPRESSED; - - - +# ---------------------------------------------------------------------------- # +# Git SCM section # +# ---------------------------------------------------------------------------- # # -# Binary section -# -# You tell indefero to use a specific version of some binary, -# instead of use thoses find in the system PATH. -# -# Monotone backend allow you to add extra options for the started monotone process -# -$cfg['svn_path'] = 'svn'; -$cfg['svnlook_path'] = 'svnlook'; -$cfg['svnadmin_path'] = 'svnadmin'; -$cfg['hg_path'] = 'hg'; -$cfg['git_path'] = 'git'; -$cfg['mtn_path'] = 'mtn'; -$cfg['mtn_opts'] = array('--no-workspace', '--no-standard-rcfiles'); - - - - - -# -# GIT Scm section -# Read the file doc/syncgit.mdtext for more information +# Read the file 'doc/syncgit.mdtext' for more information # -# Uncomment this line to enable the GIT support +# Uncomment this line to enable git support. # $cfg['allowed_scm']['git'] = 'IDF_Scm_Git'; -# The path to git repositories. %s is replaced with the project name -# Do not forget to give read access to these folders to your www user. -# For example, adding www to the git group. +# The path to the git repositories. '%s' is replaced with the project name. +# Do not forget to give read access to these folders to your www user, +# for example by adding the www user to the git group. $cfg['git_repositories'] = '/home/git/repositories/%s.git/'; -# Git url for public access to a repositorie. -# %s is replaced with the project name -# @see doc/syncgit.mdtext for the git-daemon configuration +# Git URL for public access to a repository. '%s' is again replaced with +# the project name. See 'doc/syncgit.mdtext' for the git-daemon configuration. $cfg['git_remote_url'] = 'git://137.121.75.54/%s.git'; -# Git url for private/write access to a repositorie. -# %s is replaced with the project name -# @see doc/syncgit.mdtext for the SSH authentification +# Git URL for private / write access to a repository. Again, '%s' is replaced +# with the name of the project. See 'doc/syncgit.mdtext' for more information +# about SSH authentification $cfg['git_write_remote_url'] = 'git@137.121.75.54:%s.git'; -# The core.quotepath is configured on all new repository created by indefero -# This option disable characters to be escaped, -# when git commands run on a UTF-8 shell -# - true: All characters upper than 0x80 will be escape (default) -# - false: Characters is print directly, -# enable accented character in a UTF-8 shell -# If you see malformed filename in the source viewer, -# try to uncomment the next line +# The 'core.quotepath' option is configured on all new repositories created by +# indefero. This option disable characters to be escaped, when git commands run +# on an UTF-8 shell. +# +# - true: All characters above 0x80 will be escaped (default) +# - false: Characters are printed directly, which for example enables +# accented characters in an UTF-8 shell +# +# If you see malformed filenames in the source view, try to set this to false. # $cfg['git_core_quotepath'] = false; # Path to the gitserve.py script $cfg['idf_plugin_syncgit_path_gitserve'] = '/home/www/indefero/scripts/gitserve.py'; -# Path to the authorized_keys of your git user +# Path to the 'authorized_keys' file of your git user $cfg['idf_plugin_syncgit_path_authorized_keys'] = '/home/git/.ssh/authorized_keys'; -# Path to the tmp file for keys synch +# Path to the temporary file for key synchronization $cfg['idf_plugin_syncgit_sync_file'] = '/tmp/SYNC-GIT'; -# Path to the Git home +# Path to the git home $cfg['idf_plugin_syncgit_git_home_dir'] = '/home/git'; # Path to the folder which contains all git repositories $cfg['idf_plugin_syncgit_base_repositories'] = '/home/git/repositories'; -# Set a custom git-post-update script -# Use it only, if you know you are doing ! +# Set a custom git-post-update script. Use this only, if you know you are doing! # $cfg['idf_plugin_syncgit_post_update'] = '/my/script'; -# Automatic delete git repositorie of deleted project +# Automatically delete git repositories of deleted projects # $cfg['idf_plugin_syncgit_remove_orphans'] = true; - - - +# ---------------------------------------------------------------------------- # +# SVN SCM section # +# ---------------------------------------------------------------------------- # # -# SVN Scm section # Read the file doc/syncsvn.mdtext for more information # -# Uncomment this line to enable the SVN support +# Uncomment this line to enable the SVN support. # $cfg['allowed_scm']['svn'] = 'IDF_Scm_Svn'; -# In the case of subversion, the admin of a project can also select a -# remote repository from the web interface. From the web interface -# you can define a local repository, local repositories are defined -# here. This if for security reasons. +# In case of subversion, you can either use a local or a remote repository. +# The forge admin can configure a remote repository directly from the +# web interface. Local repositories cannot be configured from there, +# for security reasons, but have to be defined here. +# '%s' is replaced with the project name. $cfg['svn_repositories'] = 'file:///home/svn/repositories/%s'; -# The HTTP URL to the svn repositorie -# We add "trunk" to invite people to checkout the trunk of the project. +# The HTTP URL to the local SVN repository. +# We add 'trunk' to invite people to checkout the trunk of the project. +# Again, '%s' is replaced with the project name. $cfg['svn_remote_url'] = 'http://localhost/svn/%s/trunk'; -# Path to authenfication files for dav_svn +# Path to the authentification files for dav_svn $cfg['idf_plugin_syncsvn_authz_file'] = '/home/svn/dav_svn.authz'; $cfg['idf_plugin_syncsvn_passwd_file'] = '/home/svn/dav_svn.passwd'; -# Path to the folder which contains all svn repositories +# Path to the folder which contains all SVN repositories $cfg['idf_plugin_syncsvn_svn_path'] = '/home/svn/repositories'; -# You can custom permissions access for each user group. +# You can customize permissions for each user group. # $cfg['idf_plugin_syncsvn_access_owners'] = 'rw'; # $cfg['idf_plugin_syncsvn_access_members'] = 'rw'; # $cfg['idf_plugin_syncsvn_access_extra'] = 'r'; # $cfg['idf_plugin_syncsvn_access_public'] = 'r'; # $cfg['idf_plugin_syncsvn_access_private'] = ''; -# Automatic delete svn repositorie of deleted project +# Automatically delete local SVN repositories of deleted projects # $cfg['idf_plugin_syncsvn_remove_orphans'] = true; - - - +# ---------------------------------------------------------------------------- # +# Mercurial SCM section # +# ---------------------------------------------------------------------------- # # -# Mercurial Scm section # Read the file doc/syncmercurial.mdtext for more information # -# Uncomment this line to enable the Mercurial support +# Uncomment this line to enable the Mercurial support. $cfg['allowed_scm']['mercurial'] = 'IDF_Scm_Mercurial'; -# The path to mercurial repositories. %s is replaced with the project name +# The path to mercurial repositories. '%s' is replaced with the project name. $cfg['mercurial_repositories'] = '/home/mercurial/repositories/%s'; $cfg['mercurial_remote_url'] = 'http://example.com/hg/%s'; @@ -388,7 +376,7 @@ $cfg['idf_plugin_syncmercurial_hgrc'] = array( ); # Based on the paths provided in the Apache configuration, -# you need to setup the following lines +# you need to setup the following lines. $cfg['idf_plugin_syncmercurial_passwd_file'] = '/home/mercurial/auth/.htpasswd'; $cfg['idf_plugin_syncmercurial_path'] = '/home/mercurial/repositories'; $cfg['idf_plugin_syncmercurial_private_notify'] = '/home/mercurial/tmp/notify.tmp'; @@ -397,28 +385,26 @@ $cfg['idf_plugin_syncmercurial_private_url'] = '/hg/%s'; # Authentification file for private repositories $cfg['idf_plugin_syncmercurial_private_include'] = '/home/mercurial/scripts/private_indefero.conf'; -# Password storage type -# @see doc/syncmercurial.mdtext +# Password storage type (see 'doc/syncmercurial.mdtext') # $cfg['idf_plugin_syncmercurial_passwd_mode'] = 'sha'; - - - +# ---------------------------------------------------------------------------- # +# Monotone SCM section # +# ---------------------------------------------------------------------------- # # -# Monotone Scm section # Read the file doc/syncmonotone.mdtext for more information # -# Uncomment this line to enable the Monotone support +# Uncomment this line to enable the monotone support. # $cfg['allowed_scm']['mtn'] = 'IDF_Scm_Monotone'; # The path to a specific database (local use) or a writable project -# directory (remote / usher use). %s is replaced with the project name +# directory (remote / usher use). '%s' is replaced with the project name. $cfg['mtn_repositories'] = '/home/mtn/repositories/%s.mtn'; # The URL which is displayed as sync URL to the user and which is also -# used to connect to a remote usher +# used to connect to a remote usher. $cfg['mtn_remote_url'] = 'mtn://example.com/%s'; # Whether the particular database(s) are accessed locally (via automate stdio) @@ -431,7 +417,7 @@ $cfg['mtn_db_access'] = 'local'; # This allows basic control of a running usher process via the forge # administration. The variable must point to the full (writable) # path of the usher configuration file which gets updated when new projects -# are added +# are added. # $cfg['mtn_usher_conf'] = '/var/lib/usher/usher.conf'; # Full path to the directory tree which contains default configuration files @@ -446,13 +432,10 @@ $cfg['mtn_db_access'] = 'local'; # $cfg['mtn_confdir_extra'] = array('hooks.d/something.lua') +# ---------------------------------------------------------------------------- # +# Hacker section (for advanced users) # +# ---------------------------------------------------------------------------- # - - -# -# Hacker section -# Reserved to avanced user -# $cfg['installed_apps'] = array('Pluf', 'IDF'); $cfg['pluf_use_rowpermission'] = true; @@ -463,53 +446,54 @@ $cfg['middleware_classes'] = array( 'IDF_Middleware', 'Pluf_Middleware_Translation', ); - + $cfg['template_context_processors'] = array('IDF_Middleware_ContextPreProcessor'); $cfg['idf_views'] = dirname(__FILE__).'/urls.php'; -# If you want custom some template files, -# you must tell to the template system where search your updated files by -# adding this folder in the 'template_folders' array. -$cfg['template_folders'] = array(/* '/your/folder', */ - dirname(__FILE__).'/../templates', - ); - -# You can custom the URL redirection, after a login/logout +# If you want to customize some of the template files, you must tell the +# template system where it can find your updated files by adding the particular +# folder to the following array. +$cfg['template_folders'] = array( + dirname(__FILE__).'/../templates', +); + +# You can customize the URL redirection after a login or logout action. $cfg['login_success_url'] = $cfg['url_base'].$cfg['idf_base']; $cfg['after_logout_page'] = $cfg['url_base'].$cfg['idf_base']; -# Set to true when uploaded public keys should not only be validated -# syntactically, but also by the specific backend. For SSH public -# keys, ssh-keygen(3) must be available and usable in PATH, for -# monotone public keys, the monotone binary (as configured above) +# Set to true if uploaded public keys should not only be validated +# syntactically, but also by a specific backend. For SSH public +# keys, ssh-keygen(3) must be available and usable in the system PATH, +# for monotone public keys, the monotone binary (as configured above) # is used. $cfg['idf_strong_key_check'] = false; -# If you want to use another memtypes database +# If you want to use another mime types database, enter its path here. # $cfg['idf_mimetypes_db'] = '/etc/mime.types'; -# Extra text files when displaying source +# Extentions of additional text files that should be displayed inline. # $cfg['idf_extra_text_ext'] = 'ext1 ext2 ext3'; -# If you can execute the shell commands executed to get info -# from the scm with the user of your PHP process but it is -# not working from within PHP, this can be due to the environment -# variables not being set correctly. Note the trailing space. +# If you can execute the needed shell commands to query information from your +# SCM, but the same shell commands do not work from within the indefero +# instance, this can be due to the environment variables not being set +# correctly. ATTENTION: Do not forget the trailing space! # $cfg['idf_exec_cmd_prefix'] = '/usr/bin/env -i '; -# If you do not want to have calculations of the repositories, attachments -# and downloads size, set it to true. You can set to false some -# times to times to check the size. +# If you do not want to let indefero calculate the sizes of repositories, +# attachments, or downloads, set this to true. (You can temporarily set this +# to false in case you want to quickly check some size, of course.) # $cfg['idf_no_size_check'] = false; -# The extension of the downloads are limited. You can add extra -# extensions here. +# The file extensions for file uploads (issues and downloads view) are limited. +# You can allow additional extensions here. # $cfg['idf_extra_upload_ext'] = 'ext1 ext2'; -# By default, the size of the downloads is limited to 2MB. +# By default, the size of a single file upload is limited to 2MB. # The php.ini upload_max_filesize and post_max_size configuration setting will # always have precedence. # $cfg['max_upload_size'] = 2097152; // Size in bytes return $cfg; +